语言选择: 中文版 ∷  英文版

快速反应停流仪

  • 快速反应停流仪
快速反应停流仪

快速反应停流仪

进行快速动力学瞬间实时记录,或离线分析,为广大的快速动力学研究学者提供了强有力的武器。可进行下列应用:
*
蛋白质折叠动力学(Protein Folding)
*
酶动力学(Enzyme Kinetice)
*
底物结合(Substrate Binding)
*
构象转变(Conformational Changes)
*
胞内底物运输(Substrate Transport in Vesicles)
*
第二信使研究(Second Messenger Studies)
*
快速化学反应动力学(Rapid Chemical Reaction Kinetics)

仪器配置:

(a). Computer-controlled servo motor drive unit. ---------电脑控制的伺服马达驱动系统

(b). Syringe/valve/cell assembly with three drive syringes and choice of 0.2, 0.5 or 2.5 cm path length observation cells; each cell requires less than 20 μl per reactant per shot and has a dead time less than 1 msec. -----------3个驱动针筒、阀、样品池

(c). Electronic control unit with servo motor power supply and amplification circuits for two channels allowing simultaneous measurement of fluorescence and absorbance. --------电子控制器,同时检测荧光和吸收双通道

(d). Arc lamp source consisting of low ripple power supply, 150 watt mercury-xenon lamp, with parabolic mirror housing, monochromator and optical fiber. ----------150瓦汞灯

(e). Two detectors, one UV-enhanced photodiode and one UV-enhanced photomultiplier. ------------两个紫外检测器

(f). Dell Precision T3500 MiniTower with Intel 2.53 GHz quad core processor---------------电脑

(g). Software for data collection and analysis, running under Windows XP.--------软件

光谱仪单色器及光纤已经包含,荧光部分(荧光滴定及特异性研究),其它快速动力学瞬间实时记录功能是一致的。

优点

1、伺服马达驱动系统,其它品牌使用气动或步进马达,伺服马达驱动在高转矩,闭环伺服控制方面优于其它马达系统.
第一,针对高转矩, 对于“停止/开始”瞬间精准控制,保持多次试验,长时间试验的高重复性( from experiment to experiment and from year to year . 气动系统必须在恒压强下工作,而不能在恒速度下工作,导致不能长时间工作的重复性; 步进马达有很强的反冲效应,导致驱动时间过长而不能工作。
第二, 伺服马达驱动可以闭环控制位移,精准地反馈并修正速度和位置参数,具有无可匹敌的高重复性!这是气动或步进马达所不具备的,它们没有反馈修正功能的能力。Basically the servo motors combination of instantaneous stops and starts as well as closed loop feedback ensure unparallel repeatability.

2、三支注射针筒系统,更好的顺序混合 ( sequential mixing
气动系统不能很好地顺序混合,因为不是同一类型的执行触发器
Pneumatic systems are quite poor at sequential mixing, since they are an all or non type of actuator.

3、三支针筒在“开始/停止”操作一致性,保持高重复性!
其它品牌每一个针筒采用单独的步进马达,同步性较差,步调不一致,导致数据延时,重复性不好。

4、最小体积量20微升,Minimum volume of 20 ul per reactant, per shot.

5、一致性的死时间.
气动系统必须在恒压强下工作,而不能在恒速度下工作,导致死时间变化(因为推进器在不断老化),需要经常校准。

6、两年保修.
7
、高灵敏性的PMT(光电倍增管)检测器。
The observation cell, the filter and PMT geometry have been optimized for maximum signal.

8、超级安静的电子控制器提高信噪比,使得低亮度的荧光得到检测
Ultra quiet electronics for the light source for improved signal to noise for low light level fluorescence.

9、透明的注射针筒,气泡可以看见并移除,其它品牌无此功能,只有拿到不好的数据时才知道!.

上一个:没有了! 下一个:快速化学淬灭系统